Balance

1. Zepp Flow™ currently supports these languages: English, French, German, Italian, Spanish, Japanese, Korean, Portuguese.

2. The battery life may vary according to the settings, operation conditions and other factors. So the actual result may differ from the laboratory data.

Typical usage scenario: Heart rate monitoring is often on and measures at 10-minute intervals, sleep monitoring enabled; static watch face selected; default screen brightness; 15 minutes of Bluetooth phone calls per week, 30 minutes of music playback; 150 pushed messages a day; receive 3 call notifications per day; raise wrist to see watch time 100 times per day; test blood-oxygen 2 times per day; test body fat 2 times per day; bright screen operations for 5 minutes per day; GPS running for 90 minutes per week.

Battery Saver Mode: Only some functions are available, such as manual measurement of heart rate, blood-oxygen and stress, one-tap measurement, use of sports modes, PAI, daily activity, alarm clock, calendar, to-do list, and settings. Health monitoring functions such as heart rate, blood-oxygen and stress monitoring are turned off, and only basic sleep monitoring is enabled; Bluetooth connection is limited to BLE, raising the wrist to light up the screen is turned off, and GPS is turned off.

Clock Mode: All-day heart rate monitoring, Bluetooth connection to the phone, and other functions are turned off; only step count and basic sleep information are recorded.

Heavy usage scenario: heart rate monitoring is always on and measures at 1-minute intervals, sleep monitoring and supplementary sleep monitoring are enabled with 8 hours of sleep breathing quality monitoring, stress monitoring enabled; animated watch face selected; 60 minutes of Bluetooth phone calls per week, 60 minutes of music playback; voice assistant enabled; 150 pushed messages a day lighting up the screen display; receive 3 call notifications per day; raise wrist to see watch time 100 times per day; test blood-oxygen 2 times per day; test body fat 2 times per day; bright screen operations for 15 minutes per day; GPS running for 90 minutes per week.

AOD Mode: Under heavy usage scenario, with the smart screen display function turned on.

Accuracy GPS Mode: Turn on heart rate monitoring and GPS movement (dual-frequency, all satellites).

Automatic GPS Mode: Turn on heart rate monitoring and GPS movement. This mode lasts approximately 44 hours, but the actual duration may vary depending on the satellite signal strength in your location.

Power Saving GPS Mode: Turn on heart rate monitoring and GPS exercise (single frequency, GPS low power consumption).

3. Readiness score and insights are for reference only, and can not be used for medical purposes or for diagnosis or a medical condition. The Knowledge Base was developed by a team of experts, including Dr. Lisa Meltzer - a clinical psychologist who has more than 22 years of clinical teaching and research experience in the field of sleep health, providing sleep health solutions for individuals, enterprises and hospitals.

4. Smart recognition of strength training exercises can only be engaged within the Strength Training sports mode. 25 exercises are able to be recognized at time of product release, including: Bodyweight squats, Bodyweight straight arm front squats, Barbell squats, Tricep pushdowns, Bent over rows, Barbell bench press, Sit-up holds, Knee-touch sit-ups, Dumbbell flys, Burpees, Burpee jumps, Overhead tricep extensions, Lying tricep extensions, Lateral raises, Jumping jacks, Lat pulldowns, Deadlift, Push-up, Shoulder press, Pull up, Bicep curls, Seated cable rows, Dumbbell drag curls, Straight-arm pulldowns, Russian twists. If an exercise is not auto-recognized by watch, the Zepp App can provide a list of muscle groups or exercise names to choose from.

5. The list of 14 sports that are compatible with training templates and interval training plans include: Outdoor running, Treadmill, Outdoor cycling, Indoor Cycling, Indoor fitness, Strength Training, Core training, Pool swimming, Jump rope, Stair Climbing, Rowing machine, Mountain biking, BMX, Race walking. Training templates need to be created on the Zepp App, and up to 40 templates can be stored at a time; interval training can be set directly on the watch.

6.Peripheral Bluetooth devices must support BLE connection for compatibility.

7. Connection to these apps may depend on your location and smartphone device.

8. Indoor positioning services are not supported. Positioning speed and accuracy may be affected by the surrounding environment. The number of satellites connected to simultaneously, and specific satellite connections, may depend on your location.

9. The Amazfit Balance can be used as a map browsing tool to import OSM map files. The downloaded offline map must match your real location to be displayed, and a route file must be imported for navigation—it's not possible to choose a point on the offline map for navigation.

10. Navigation functions are compatible with these 18 sports modes: Outdoor running, Walking, Outdoor cycling, Climbing, Hiking, Cross-country skiing, Mountain biking, BMX, Outdoor boating, Bobsleigh and tobogganing, Sledding, Ski orienteering, Biathlon, Race walking, Snowshoeing, Trail running, Orienteering, Open water swimming. The shown straight line back to the start of a journey may not be a practical route to follow due to environmental factors; this is only intended to help you keep track of your position in relation to the start point of the journey.

11. Sleep monitoring can record night sleep and naps that last more than 20 minutes. Sleep Breathing Quality tracking needs to be enabled in the Zepp App or in the settings of the watch's Sleep feature.

12. 24-hour monitoring of heart rate and blood-oxygen saturation (SpO₂) need to be enabled in the Zepp App. For heart rate monitoring, the user must enable Auto Heart Rate Monitor in the Zepp App, and the minimum value can be set to 1 minute. Abnormal heart rate alerts and the preset value need to be set in the Zepp App. To measure blood-oxygen saturation (SpO₂), please wear the watch tightly at one finger-width from the wrist, and keep your arm still for best results. SpO₂alerts are sent if the detected rate is too low compared to the preset value, which needs to be set in the Zepp App, at a minimum of 80%. Movement, and environmental and physical characteristics can affect speed and accuracy of monitoring and measurement. The 24-hour stress level monitoring needs to be enabled on the watch or in the Zepp App. Alerts for high stress levels are based on the preset value, and prompts for the breathing exercise need to be enabled on the watch. To process the one-tap measurement and other manual metric measurements, please wear the watch tightly at one finger-width from the wrist, and keep your arm still for best results. Movement, and environmental and physical characteristics can affect speed and accuracy of monitoring and measurement. This product and the Zepp App are not medical devices and cannot be used for medical purposes, or as basis for diagnosis of any medical condition. Detection results are provided for reference only. Please consult professional medical institutions if you feel unwell.

13. The Body Composition measurement uses bioelectrical impedance analysis (BIA) technology to track body composition based on body fat, skeletal muscle, muscle, water, bone mass, protein, BMI and Basal Metabolism measurements. It is not intended to diagnose or treat a medical condition and results are for reference only. The function should not be used by pregnant women, people with implantable pacemakers, defibrillators or other implanted medical apparatus. Body composition test data may be inaccurate for people below the age of 20, professional athletes or other populations with few special circumstances, and results may vary depending on your arm posture during measurement. Before measuring your body composition, please enter the required physical characteristics into your Zepp App profile, and follow the instructions during the test. This feature is not available in Canada.

14. Alerts and reminders need to be enabled in the watch settings or Zepp App.

15. WhatsApp picture replies require connection to an Android phone.

16. Amazon, Alexa and all related marks are trademarks of Amazon.com, Inc. or its affiliates. To see the full list of 15 countries/regions and 14 languages supported, as well as how to activate and use Alexa on your Amazfit Balance, please visit support.amazfit.com.

17. Zepp Aura is not available in all countries and regions, and its contents and any information provided is intended solely for educational purposes and should not be considered a replacement for professional medical advice. Always consult a qualified healthcare provider when seeking medical assistance. For more information about Zepp Aura, click here: https://aura.zepp.com/

18. Zepp Fitness Membership is not available in all countries/regions, and will be available for a trial period with subsequent use requiring subscription.

19. According to the ISO 22810-2010 standard, the Amazfit Balance achieves a rating of 5 ATM, for a water-resistance of up to 50 meters, and is therefore suitable for splashes, snow, showering, or swimming. It has passed third-party testing conducted by TUV SUD, and the report numbers are 68.189.23.0105.01 and 68.189.23.0156.01. Remove the watch when taking a hot shower or trip to the sauna, since too much steam can affect the seal and make it less water-resistant in future. Do not wear the watch with a leather or metal strap when swimming - when preparing to swim, change to a fluoroelastomer strap or other suitable type. For more information, please visit the support page at: support.amazfit.com

20. The maximum storage space for music is 2.3GB (due to the system space occupied, the actual space used by the user may be less than 2.3GB); based on 5-10MB per song, it can store up to 270-470 MP3 songs.

21. Due to the device's storage limit, only a maximum of 20 membership cards can be added to the same account. Supported codes include Code 128, Code 39, UPC A, EAN 13, and EAN 8 and QR codes.

22. This feature is only supported by Android devices with Zepp App version 6.10.0 or higher version installed.

23. Morning updates need to be set in the Zepp App or in the watch settings.

24. Track Run mode and Smart Trajectory Correction only support 200 meter and 400 meter running track lengths.

25. Virtual Pacer is only compatible with Outdoor Running, Track Run, and Treadmill sports modes.

26. Race Achievement Predictions only tracks data from the Outdoor Running mode. At least one 3km run must be completed in order to obtain performance prediction data. Predictions can be provided for the following race types: 3km race, two-mile race, three-mile race, 10km, half marathon, and full marathon.

27. Live Sports Data Broadcast supports English and Chinese voice broadcasts.

28. This feature needs to be enabled in the watch settings or Zepp App.

29. Corresponding sports modes include: Outdoor Running, Treadmill, Walking, Indoor Walking, Outdoor Cycling, Pool Swimming, Rowing Machine, Elliptical. The accuracy and sensitivity of the workout recognition feature varies from person to person, and are related to the posture and proficiency of the user during their workout. Short workout duration or frequent changes in posture may not trigger the automatic recognition feature. When you are driving a car or taking a bus, or taking part in other such activities, accidental recognition may be triggered if these activities are particularly similar to the selected workout mode. When you are conducting outdoor activities, if the GPS signal is poor or the AGPS data information has not been synchronized with the mobile phone for an extended period, these outdoor activities may be assessed as indoor activities.

30. The HUNT Fitness Study indicates that people who maintain a PAI score of 100 or higher show lower risk of hypertension, heart disease, and type-2 diabetes. HUNT Fitness Study: This study was conducted by Professor Ulrik Wisloff of the Faculty of Medicine, Norwegian University of Science and Technology. It lasted for more than 35 years and had more than 230,000 participants. To use this function, all-day heart rate monitoring must be enabled.